Filter
Top Products
133
If with the “DHCP On” setting no
connection can be established between
the receiver and DHCP server/router,
switch the setting to “DHCP Off” and
make the setting as described for (DHCP
“Off”).
Conguration example:
Receiver:
IP address: 192.168.0.11
Subnet Mask: 255.255.255.0
PC/Laptop:
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0
Main menu - Interfaces (CI, hard disk and network)
Note: Refer to our network function connection examples at the end of this manual and the instructions on this
subject available on the Internet under “www.kathrein.de” “Service” → “Software and Downloading” →
“Receiver” → “UFS 922”.
When connecting the receiver to a suitable FTP program, note the following:
User name: root
Password: 0000
You require both of these components to obtain access to the receiver via your FTP program.
The password is the receiver’s PIN code. This is set in the “Parental Control” menu.
The factory setting is “0000”.