Kathrein UFS 922 sw Satellite TV System User Manual


  Open as PDF
of 184
 
149
Tuner Conguration
Simple LNB
The individual items are selected using the

buttons. If you require to access submenus, they can be called up
using the
button. Changes to the current settings can be made using the

buttons or the numeric keypad.
Satellite and position:
Select here the satellite you desire from the available
satellites. By pressing the
button at this point you
can view a list of the satellites saved in the receiver.
Use the
buttons to select the satellite you want and
conrm your selection with the
button.
LNB Setting:
Select the “LNB Setting” eld. If your reception system does not have a Universal LNB, press the
button so that
you can make the settings for the LNB.
You can choose from the following LNB types:
- Universal
- Simple
- User-dened
If your LNB is neither a Universal nor a Simple LNB, select the setting “User-dened”. The setting “User-dened” means
you must manually set the frequency ranges that are congured for your LNB. Select the frequency range to be changed
and set the values that are correct for your LNB, using the

buttons or the numeric keypad. When you have
completed all settings, press the
button.
Test-Transponder:
Select the “Test Transponder” eld. Here you can select a transponder for checking whether your settings are correct
using the signal strength bar and signal quality bar.
When you have completed all settings, press the
button.
Tuner 1
Select “Tuner 1” eld and press the
button to allow
you to make the settings for the rst tuner.
 previous next