Filter
Top Products
29
206-4147
Audio Setup Options (Cont.)
Audio Reset / TV Speaker / Secondary Audio Program (SAP) Setup
Audio Reset
This option restores the Sound Mode to factory default settings.
1. Press MENU on the Installer Remote, and use the arrow
navigation keys to select/highlight the AUDIO menu option.
Then, press ENTER.
2. Use the Up/Down arrows to select the Reset option under
Sound Mode, and then press ENTER.
3. At the prompt for confi rmation, select Yes and press ENTER
to continue. The audio settings will be reset immediately,
and you will see a “Resetting audio confi guration...” on-
screen message.
4. Press MENU to return to TV viewing, or press RETURN to
return to the previous menu level.
TV Speaker
If using an external audio equipment (a Hi-Fi system or an SRS
system), turn OFF the display panel’s internal speakers. In
AV, Component, RGB, and HDMI with HDMI to DVI cable, the
display panel speaker can be operational even when there is
no video signal.
1. Press MENU on the Installer Remote, and use the arrow
navigation keys to select/highlight the AUDIO menu option.
Then, press ENTER.
2. Use the Up/Down arrows to select the TV Speaker option,
and then press ENTER.
3. In the TV Speaker pop-up window, use the Up/Down arrows
to select On or Off. Then, press ENTER.
4. Press MENU to return to TV viewing, or press RETURN to
return to the previous menu level.
Secondary Audio Program (SAP) Setup
• For analog signal: The STB1000 can receive MTS stereo
programs and any SAP that accompanies the stereo program
if the station transmits an additional sound signal. Mono
sound is automatically used if the broadcast is only in Mono.
• For digital signal: If other languages are available on the digi-
tal signal, select them using the SAP button on the Installer
Remote.
Press the SAP button on the Installer Remote repeatedly until
the desired option (Mono, Stereo, or SAP) displays on-screen.
AUDIO
Enter
Move
-+
• Level 3
Balance 0
Sound Mode : Standard
• SRS TruSurround XT: Off
• Treble 50
• Bass 50
• Reset
TV Speaker : On
Off
On
►
►
LR
AUDIO
Enter
Move
-+
• Level 3
Balance 0
Sound Mode : Standard
• SRS TruSurround XT: Off
• Treble 50
• Bass 50
• Reset
TV Speaker : On
►
►
LR
No
Yes
All audio settings will be reset.
Continue?
?