Filter
Top Products
62
206-4147
Remote Jack Pack Setup
RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093
RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE
to 001). See Installer Menu detailed descriptions for further information.
STB Connections
Make these connections ONLY after Commercial Mode Setup and STB1000 Cloning
procedures are complete.
Refer to the figure below, and connect the RJ-45 Control cable from the RJP cable bundle to the RJP
INTERFACE port on the STB1000’s jack panel. Then, connect HDMI, RGB, and Composite Video/Audio
connectors, as applicable, for the cable bundle.
Remote Jack Pack Connections & Setup
COMPONENT IN
VIDEO
AUDIO
R
L
UPDATE
RESET
AUDIO
(RGB/DVI)
PB
Y
P
R
.....
....
..........
2
1(DVI)
DIGITAL VIDEO IN
OPTICAL
DIGITAL
AUDIO OUT
REMOTE
CONTROL OUT
SPEAKER
OUT
8
RJP
INTERFACE
RGB IN
VIDEO
R-AUDIO-
L/MONO
AV IN 1
RGB(PC)
.....
.....
.....
TV-LINK
CFG
MPI/GAME
CONTROL
DISPLAY CONTROL
LAN
..........
HDMI/DVI IN 1 PORT
Connect HDMI connector
from RJP cable bundle.
AUDIO/VIDEO IN 1
Connect Composite Video/Audio
connectors from RJP cable bundle.
(Composite Video on legacy RJP only.)
RGB IN (PC)
Connect RGB connector
from RJP cable bundle
(legacy RJP only).
RJP INTERFACE
Connect RJ-45 Control
cable from RJP cable
bundle.
093 RJP AVAILABLE 001