Filter
Top Products
67
206-4147
Reference: Downloading a Splash Screen using a USB Memory Device
Splash Screen Image File Guidelines
• The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP.
• The image should be no larger than 3 MB.
• The ideal resolution for the image is 1366 x 768 pixels.
• The image fi le must be stored in a folder named “LG_DTV” in the root
directory of USB memory device.
• Ensure the USB device has been formatted with FAT format.
Downloading a Splash Screen Image
1. Turn the TV ON.
2.
Plug the USB memory device into the USB port on the STB rear panel.
3.
Press MENU on the Installer Remote to display the STB setup menus.
4. Use the arrow navigation keys to select/highlight either the Option (if EBL is in Pass-through Mode) or
Lock (if STB is in FTG or LodgeNet PPV Mode) menu icon; then, press the number “7” key a total of
seven times to display the USB Download Menu (see sample screen on previous page).
5. Use the Up/Down arrow keys to select Upgrade TV Software, and then press ENTER.
6. Use the Up/Down arrow keys to select the image fi le to download, and then press ENTER.
The STB will show download completion progress in a new window. Do NOT remove the USB device un-
til the image download is complete. When the image download is complete, the STB will reset itself with
an automatic restart. Upon the restart, you should see the new splash screen on the display panel.