Magnavox MDR537H DVR User Manual


 
18
E
N
EN
CONNECTION
HDMI Mode and Actual Output Si
g
nals
P
ress
[
HDMI
]
to select the HDMI output mode. The output mode changes as
f
ollows every time
[
HDMI
]
is presse
d
.
HDMI connection makes this unit automatically output the most suitable resolution for your TV.
Front Panel Displa
y
V
ideo Output Signal
480 Progress
i
v
e
Press
[
HDMI
]
720 Progressiv
e
Press
[
HDMI
]
1080 interlace
d
Press
[
HDMI
]
1080 Progressiv
e
Press [HDMI]
• The HDMI mode that is not supported by the display device will be skipped.
*HDMI: High Definition Multimedia Interfac
e
Copyright protection syste
m
To pla
y
back the digital video images of a DVD via an HDMI connection, it is necessar
y
that both the pla
y
er and the displa
y
device (or an AV amplifier) support a cop
y
right protection s
y
stem called HDCP (high-bandwidth digital content protection
s
y
stem). HDCP is a cop
y
protection technolog
y
that comprises data encr
y
ption and authentication of the connected A
V
device. This unit supports HDCP. Please read the operating instructions of
y
our displa
y
device (or AV amplifier) for more
inf
o
rm
at
i
o
n
.
Note
• Some devices with an HDMI input may not operate properly with this unit
.
• When using an HDCP-incompatible displa
y
device, the image will not be viewed properl
y.
• Amon
g
the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled
b
y
another device via the HDMI connector
.
• The audio signals
f
rom the HDMI connector (including the sampling
f
requency, the number o
f
channels and bit length) may be
limited by the device that is connected
.
• Among the monitors that support HDMI, some do not support audio output (
f
or example, projectors). In connections with device
such as this unit, audio signals are not output
f
rom the HDMI output connector
.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB
.
• When a power failure occurs, or when you unplug the unit, some problems with the HDMI setting might occur. Please check and set
t
h
e HDMI setting again.