Filter
Top Products
31
SETUP MENU
You display the setup menu by selecting the setup item in the
main menu. Choose between the menu sections by pressing the
or buttons to move the highlight along the section bar, and then
press the and buttons to move the highlight bar through
the option list.
Some of the selections available from the setup menu are for
advanced use of the Plaza HDR•S. We recommended that you
take the time to read this section carefully before you make any
changes.
GENERAL MENU SECTION
Highlight the option you want to alter using the
and
buttons. When you have finished making the changes you want,
leave the menu system by pressing or .
SUBTITLES
Press
to switch on subtitles for all channels that provide them.
Switch subtitles o by pressing
again.
SUBTITLE LANGUAGE
The Freesat channels can broadcast with subtitles available in a
number of languages. The Plaza HDR•S is set to English subtitles,
but you can change this setting by pressing to show the
subtitle language menu.
Use and to highlight the language
you want for subtitles (if available) and press .
AUTO STANDBY
To conserve power, the Plaza HDR•S will switch to standby after
three hours if no buttons are pressed on the remote control or
front panel. The Auto standby function is normally turned on, and
can be turned o by pressing the button.
HDCP
HDCP prevents copying of digital audio and video from the HDMI output
of the receiver. By default it is turned on for all programmes, however you
can turn it o for programmes that have not been flagged as protected
by the broadcaster by pressing . Press to turn it back on again.