Filter
Top Products
38
SETTING UP FOR ON DEMAND TV (continued)
If your broadband modem/router is not compatible with DHCP
(Dynamic Host Confi guration Protocol), you will need to set
the addresses manually. Use the
or buttons to change the
confi guration to “static” and for each of the addresses in turn (IP
Address, Subnet Mask, Router Address, and DNS Address) press
to highlight the address and then enter the 12 fi gures to set
that address.
When you have set the four addresses, press to return to the
System menu.
WATCHING ON DEMAND TV
You can switch to On Demand TV either through the interactive
services on a channel providing On Demand TV, or through an
online channel chosen by number or using the channel list or
programme guide.
When you switch to an On Demand TV channel, it may take a few
seconds longer to show the picture than a Freesat satellite channel. You
will then need to progress through a series of menus, using the number
buttons, the coloured buttons,
,
,
and
, and the button,
to
fi nd and start the programme you want to watch. You go through
these
menus in a di erent way depending on the online broadcaster.
HINT: Consult the manual or supplier for your modem/
router or network for help choosing the correct addresses.
HINT: The On Demand TV channels are numbered from 900
and are in the On Demand section of the programme guide