7. Next,“My Studio Setup” appears with a file save dialog box over it. You
will now need to name and save your new studio setup (or use the
default name) before you can assign an instrument to the M-Audio
Ozone’s output (labeled “Ozone”). Assign your instrument (this step is
optional), and you are done.
You can run the OMS “Test Studio” utility by going to the “Studio” menu
and releasing the mouse on “Test Studio.” Playing a note on your keyboard
will give you an audio message from your computer,“MIDI received,” while
the arrow pointing to the keyboard icon flashes. Clicking on the keyboard
icon with the mouse pointer will send a tone cluster to the M-Audio
Ozone USB MIDI output port. Any sound module connected to the
M-Audio Ozone USB MIDI Out port should play the tone cluster.
You may now exit OMS Setup by quitting the application.The rest is up to
the configuration within your music software. Generally, this means
selecting “OMS Compatibility,” or “Open Music System” for your MIDI
system setup.
M-Audio Ozone and the Mac OS 9 Sound Manager
The Macintosh Sound Manager in OS 9 will allow you to select the
M-Audio Ozone as the system’s audio output device. This allows Sound
Manager applications such as iTunes or Quicktime to play through the
M-Audio Ozone, however, you cannot use ASIO and Sound Manager
simultaneously. Set the Macintosh's default Input and Output to "Built-in"
when using ASIO applications such as Reason.To check your computer’s
audio output setting and select the M-Audio Ozone:
1. Open the Apple menu,then select “Sound” from the Control Panel’s list.
2. Under Input and Output,select “Ozone” from the list of available devices.
3. Close the Apple Sound Control Panel.
M-Audio Ozone and Mac OS X
Mac OS X will allow you to select the M-Audio Ozone as the system’s
audio output device.To change your Mac’s audio output setting to use the
M-Audio Ozone:
28