Filter
Top Products
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
34
■ DUPLEX MODE DISPLAY
Operation conditions such as PLAYBACK, COPY, REC
and ALARM REC (ALARM is displayed in red during
emergency recording), etc., can be displayed on the up-
per or lower portions of the screen.
<TIME DATE/DISPLAY SETTINGS>
TIME DATE ADJUST
DISPLAY MODE 1
CLOCK LOCATION SETTING
CAMERA DISPLAY NUMBER
CAMERA TITLE/MEMO SETTING
>>
DUPLEX MODE DISPLAY BOTTOM
<MODE 1>
01-01-2004 00:00:00
Setting ( default : “BOTTOM” )
“BOTTOM” : The operation condition is displayed on
the bottom of the screen.
“NONE” : The operation condition is not displayed.
“TOP” : The operation condition is displayed on the top
of the screen.
1. Press the SET UP button
}
<SETTINGS>
}
Select
“DUPLEX MODE DISPLAY” in the <TIME DATE/DISPLAY
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
<TIME DATE/DISPLAY SETTINGS> (continued)