Filter
Top Products
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
78
3-1. (If you make an error in entering the userID or password
• • • )
• The “[Rejection]” screen will appear.
3-2. Select “[Back to Authentication]” and either left-click or
press ENTER.
• The “[Authentication]” screen will appear.
3-3. Follow the steps in step 2-1 and enter the correct “userID”
and “password”.
4-1. (If you do not log in • • • )
Select “If you don’t want to log in, click here to exit.” and left-
click.
4-2. The message “SessionID removed in recorder & browser.
Please shut this Web Browser down to clear of your browser’s
cache.” will display. Close the Web Browser.
5-1. (To change password • • • )
The password can be changed in the “[Authentication]” screen
only by the user who has the authorization to change a
password. Follow the instructions in the menu and enter the
present “userID” and “password”.
5-2. Enter the new password in “new password:” and again in
“retype new password:”.
The number of characters that can be used in
registering a password is 16. Both alphabet letters
and numbers can be used with a distinction made
between upper and lower case. You cannot use
spaces.
5-3. To change into a new password, select “change” and left-
click or press ENTER. To stop the change, select “clear”, and
left-click or press ENTER.
♦ Welcome
This is the screen for selecting, from “Menu”, “live moni-
tor” with which live pictures will be retrieved and dis-
played, “playback” with which pictures that have already
been recorded will be retrieved and displayed, “user
maintenance”, with which the settings for user authori-
zation will be configured, “log out” for ending a job, or
“change log in user” for making a change in the logged-
in user.
Depending on what the user’s authorization is,
there are certain menus that cannot be selected.
During playback or during a search, this device
will stop playback or search mode when a request
for the acquisition of live images is transmitted.
The transfer rate during transmission depends
on the standard environment and load status of the
recorded. To ensure stable transmission, use an
image transfer rate that best matches the current
usage conditions.
The user’s sessionID (connection data) will be
lost in 5 minutes from the final operation that includes
image retrievals. If no operations are made within
that 5 minutes, no other operations can be made
after that so close the browser and then log in again.
Live and recorded images can be acquired when
the recorder POWER button is lit.
1. Select the desired “Menu” and left-click.
• Live monitor
Retrieves live images and displays the images on the
PC screen.
1. Select “live monitor” and left-click.
• The “live monitor” screen will display.
When image acquisition is tried for the first time
with the Web browser of a personal computer, a mes-
sage as shown below will be displayed. Please click
“Yes”.
When a live picture is acquired from the recorder
and the <OUTPUT B ON/OFF> setting is “ON”, the
updating speed for the Live monitor screen de-
creases. It is recommended to set the <OUTPUT B
ON/OFF> setting to “OFF”.
Communications by Web Browser (continued)