Filter
Top Products
73
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
For the recordable time when copying to a Com-
pact Flash Card,
see page 84.
This image data is administrated in 1MB unit.
Therefore, the copied area may be larger than the
set area because copying is performed in 1MB units
that include the specify area.
■ Copying from unit to videotape
Data can be copied even when the unit is recording. For
recording operations, see the instruction manual accom-
panying the analog video cassette recorder.
AUDIO CORD
(commercially
available cable,
if necessary)
To AUDIO OUT
terminal
To VIDEO OUT
terminal
VIDEO CORD
(commercially
available cable)
To AUDIO IN
terminal
To VIDEO IN
terminal
ANALOGUE VIDEO CASSETTE RECORDER
1. [Analogue video cassette recorder] Prepare the unit for
recording.
• First, set the input source to the external input connecting
this unit.
2. [This unit] Press the SPLIT/SEQUENCE button to select
the screen type to play back ( see page 36).
• Single screen, SPLIT4 (a, b and c) screen and SPLIT9 screen
can be selected.
It is also possible to copy the video of each cam-
era in order using single screen sequential play-
back ( see “SEQUENTIAL PLAY”, page 48).
3. [This unit] Use the search function to move to the beginning
of the video to copy ( see “START/END SEARCH”, page
71).
4. [Analogue video cassette recorder] Start recording.
5. [This unit] Press the PLAY button to start playback.
6. To stop copying, press the STOP button of this unit. After
stopping playback, stop the recording on the analogue video
cassette recorder.
Only video recorded of camera number dis-
played on the screen can be copied to videotape.