88
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Warnings and CALL OUT output
Warning Display
CALL OUT
output
#1
page
Canceling
the warning
Code
Status
Countermeasure
#2 : (The following numbers are in )
0 0 : MASTER 01 : SLAVE
2 0 : CFC
#3 : (The following numbers are in )
0 1 : CH 1 0 2 : CH 2 0 3 : CH 3
0 4 : CH 4 0 5 : CH 5 0 6 : CH 6
0 7 : CH 7 0 8 : CH 8 0 9 : CH 9
#4 : A warning display disappears automatically after 1 minute.
REC/RW
#4
COPY/RW
REST/RW
MIRROR
<DEVICE ERROR>
TEMP
FAN
COPY/OVER(RED)
COPY/OVER
(WHITE)
(NONE)
• Error has occurred during
writing ( or reading )of
data to HDD/media.
• One HDD could not be
detected during mirroring.
• Unable to recognize
HDD.
• Issued when in a high
temperature environment
within the tolerance level.
• The fan stopped.
• HDD recording has
overtaken copy recording.
Copy recording has
stopped.
• HDD recording is about
to
overtake copy recording.
• Reboots by watchdog
operation.
• Check the HDD/media.
• Reboot.
• Reboot.
• Turn off the power and
change the installation
condition.
• Turn off the power and
stop usage.
• Repair is requested.
• Stop HDD recording to
continue copy recording.
• Stop HDD recording to
continue copy recording.
• Stop copy recording to
continue HDD recording.
Press the
WARNING
RESET button.
Press the
WARNING
RESET button.
Turn off the
power.
Press the
WARNING
RESET button.
Lower
the temperature.
Press the
WARNING
RESET button.
Rotate the fan.
Press the
WARNING
RESET button.
Press the
WARNING
RESET button.
-
-
-
-
-
-
72,73
72,73
-
-
None
Fixed
Fixed
Fixed
Fixed
None
None
WNG13 #2
WNG33 #2
WNG43 #2
WNG6100
WNG6200
WNG5200
WNG5300
WNG3500
WNG3600
WNG5101
IMAGE MODIFIED
SYSTEM ERROR
#4
REC/
SYSTEM ERROR
#4
PLAY/
SYSTEM ERROR
#4
COPY/
SYSTEM ERROR
#4
REST/
SYSTEM ERROR
#4
• Video data that has been
altered was played back.
• System error has
occurred.
• Reboot.
• Check the HDD/media.
Press the
WARNING
RESET button.
Press the
WARNING
RESET button.
WNG5500
WNG5100
WNG14 #2
WNG24 #2
WNG34 #2
WNG44 #2
Fixed when
setting is
“ON”
Fixed
47
-
-
Warnings and CALL OUT output (continued)