Filter
Top Products
Remote control buttons and functions (cont.)
@ select switch
Your remote control has four layers: the
TV layer, the VCR-A layer, the DVD
layer, and the AUDIO layer. You can set
up each of these layers to operate a
different piece of equipment. Use this
switch to select the layer you want to set
up or use.
@ power button (POWER)
Press this switch to turn the TV on or off.
3(_number buttons (0-9)
Use to select a channel number or to
enter a parental lock code.
®
channel control (CHANNEL)
Press the top part of the button to change
to a channel with a higher number; press
the bottom part to change to a channel
with a lower number.
(_) SuperQuickView TM button (SQV)
Press to view channels you have
programmed into SuperQuickView TM
memory.
@volume control (VOLUME)
Press the top part of the button to in-
crease the volume. Press the bottom part
of the button to decrease the volume.
(7)input button (INPUT)
Use to select the input source you wish to
watch:
• TV channels on Antenna A or
Antenna B
• Other equipment connected to Input 1,
2, or ;3.
@QuickView'" button (QV)
Press this button to instantly switch to
the channel that you designated as the
Quick View TM channel. Press again to
return to the last channel viewed.
@QuickProgram (QUICK PROG.)
Use this button to directly display the
VCR menu for recording or to return to
your TV from QUICK PROG. recording.
You must be in the VCR layer.
E>Important:
You must connect a Mitsubishi VCR to
your TV with an AV Network cable to
use this feature and both your TV and
VCR must be set to the actiw_ system
one setting.
@)mute control (]YKITE)
Use to turn the ,_ound off completely or
to restore it to its original volume.
@ enter/exchange button (ENTER/
EXCH)
Use this button after selecting a channel
number, after sdecting an item from the
on-screen menu system, or with the
picture-in-picture mode.
(_)information button (INFO)
Use to view all on-screen summary of
the current settings for the TV or
AUDIO functions and the display
related to Extended Data Services
(XDS). .,
_)light button
Use to light up the remote (for 3 sec-
onds).
@adjust buttons (J, • • b)
After selecting an audio or video func-
tion, use these buttons to adjust the
sound or picture,. Also use these with
the picture-in-picture mode and to select
items :in the menus.
(_cancel button (CANCEL)
This button is used to cancel a channel
number, to clear a channel programmed
into SuperQuickView" memory, and to
clear the settin_:s of some on-screen
menus.
18 Chapter 1: Getting to Know Your TV