Filter
Top Products
Using the Active A/V Network Feature
This AN Network is a special feature that makes it easier to use
your television and other Mitsubishi A/V components together.
When you connect the A!V Network, you can po!nt the remote
control at the television, and it will pass the remote control com-
mand to other components.
You will gain even more benefits if you have a Mitsubishi VCR
equipped for the Active A/V Network. The Active A/V Network
allows you to perform many of the commonly used features of your
system at the press of just one button.
This section explains the various features of the Active A/V Net-
work.
before you begin
You must have connected an A/V Network cable from the Active
A/V Network terminal of your TV to the A/V Network IN
terminal of your VCR. See TV+Mitsubishi Products that Have
A/_ z Network Terminals in Chapter 2.
• You must have connected your VCR to INPUT-1 of your TV.
• You must have set your "TV A/V Network " setting to "Active"
or "Basic". See Setting the A/VNetwork in Chapter 3.
• Your VCR' s remote control settings should be set to "VCR-A".
• Your VCR video mute setting should be turned ON.
: Important:
Important:
what the Active A/V Network does
The Active AJV Network makes it easier and faster to use the VCR
Quick Program and Play commands and the TV PIP commands.
When using the Active A/V Network, you should always point your
remote control at your television.
If the TV is not receiving a signal on INPUT-l, it will automati-
cally turn off in about ten minutes. If you use a TV menu during
this time, the TV will turn off in about five minutes atter you stop
using the menus.
96 Chapter 4: Using the Special Features