Filter
Top Products
[_Important:
[_Important:
Naming the channels
To help you keep track of the many channels available, yolzLcan
name the channels your TV receives. In this menu, the ENTER
button performs the same function as the ADJUST keys in other
menus. After you enter a name, it will appear on-screen, next to
the channel number.
_--]1_/Main Menu
[] First Time Setup
[] Customize Display
[]Advanced Features
[] Select MV Memory
----7ADJUST to select
ENTER to enter
MENU to exit menus
[] Customize Display
[] Select Menu Type I
[] Name the Input
I
[] Name the Channels
[] Use Video Mute
[] Select Menu Language
--_ ADJUST to select
ENTER to enter
MENU to go back
i
[] Name the Channels
_] Antenna : A
(Indoodoutcioor)
Channel :- - -
]New name :....
---JADJUST to select
ENTER to enter
MENU to go back
Name the Channels
[_] Antenna : A
(Indoor/outdoor)
Channel :003
[] New name : ....
-'_ ADJUST to select
ENTER to enter
MENU to go back
O Press the MENU buttoa on the
remote control. Main Menu
will appear on the screen.
O Use the ADJUST buttons to
select "Customize Display".
Press ENTER.
You wil]_see the "Customize
Display" screen. Use ADJUST
buttons to select "Name the
Channels". Press ENTER.
0 Use the ADJUST buttons to
select an antenna (A or B).
Press ENTER.
Use the ADJUST buttons,
channel controls or number
buttons to select the channel
you want to name. Press
ENTER to store the channel
number in memory.
Press ENTER again to select a
new name for the channel. Use
the ADJUST buttons and the
ENTEI_: button to select each
letter in the new name. You
can use letters (A - Z), num-
bers (0 - 9), or symbols (:/., ( )
! ,,# $7%&, blank + ;.< = > ?
blank - ). _-
When you are setting the
name, you can clear it by
pressing the CANCEL button
when the left-most position is
un_ierlined.
When you are finished, press
the HOME button to return to
normal viewing.
The name you set will appear instead of the call letters being
supplied by Extended Data Services (XDS).
Message "Memory over!" will indicate that tl_e memory is full. If
the memory is full and you want to name a channel, you must use
the above steps to clear the name fi)r an existing channel. You can
then select the new channel to name.
62 Chapter 3: Operating Your TV