Filter
Top Products
Customizing the A/V memory position (cont.)
The Surround setting creates simulated stereo and surround
effects. You can set this setting to "Off," "Simulate" or "Hall".
• Select Off if you do not want to use any surround effects.
• Select Simulate if you are watching a non-.stereo program. _
Your TV will create a simulated stereo effect.
• Select Hall if you are watching a stereo program. Your TV will
create a simulated surround effect, making the sound seem to
extend around and behind you using the TV's internal speak-
ers.
The Speaker function allows you to turn the TV's internal speak-
ers on or off.
• Choose On if you want to play the TV's sounci through the TV's
built-in speakers.
• Choose Off if you connected your audio system to your TV and
you want to play the sound of your TV through the audio
system.
The Monitor Out function determines how t_e TV will send an
audio signal to an audio system or home theatre receiver. Your
choices are '_Variable" or "Fixed".
• If you choose Fixed, the TV will send out an audio signal at a
fixed volume level. The level will not change when you adjust
the TV's volume. Use the controls on your audio system to
adjust the volume. The fixed setting is mo:_t useful when :you
can control the audio system's volume with a remote control.
• If you choose Variable, the TV's audio output will change
when you adjust the TV's volume. If you use this setting with
an audio system, turn the TV's volume all 1;he way down, _et
the audio system's volume to an average setting and then
adjust the TV's volume until you can hear _he signal.
The Level Sound selection allows you to enable the TV to auto-
matically equalize the volume level of programs that contain
significant sound level differences from one se=_ment to another; for
example, from regular programming to commercials. To receive
the best audio fidelity for music programs, it may be desirable to
turn this setting off.
DImportant: For proper tone and volume balance, you may w:[sh to turn off the
TV_s speakers when using an external audio sys_em.
Dlmportant: Set the surround setting to "OFF" when using an A/V receiver with
Dolby Pro Logic Surround.
Getting Started 73