Mitsubishi Electronics VS-45501 Projection Television User Manual


 
TV + antenna or cable without a cable box
equipment you will need
/4
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two 1,_ads (called twin
lead or 300 ohm antenna lead), you will need to acquire:
One 300-75 ohm matching
transformer
connecting a cable
300 ohm - in
)'5 ohm - out.
Push or screw the end of the cable onto the ANT-A terminal on the
TV.
75 Ohm
Cable
_ 300 Ohm
/
300Ohm to 75 Ohm
MatchingTransformer
TV Rear Terminals
A_°r.A LOOP-OOT ,_-r-3
- (@
®
connecting an antenna with twin leads
O Use a screwdriver to connect the 300 ohm twin leads to the
transformer.
O Push the 75 ohm side transformer onto the ,_qT-A terminal on
the TV.
Basic Connections 25