Filter
Top Products
72
_>Important:
_>Important:
_>Important:
Customizing the A/V memory position (cont.)
If you set the decoder to a "text" setting and tune to a broadcas.ter
that is not sending a text signal, a large black reck:angle will appear
on your screen. Press the HOME button to make the rectangle
disappear.
If you cannot display any captions on the screen, please keep in
mind that not all broadcasters, video tapes, or laserdiscs supply
closed caption signals.
Additionally, captions might not appear if you are:
• playing a video tape that is worn or deteriorated, or
• starting to play a laserdisc or video tape from still or search
mode.
Regardless of which one of the five A/V memory dosed caption
settings chosen, the selection will apply to all five settings.
Adjusting the sound
This section contains descriptions for each audio setting and
explains how to adjust them for the A/V memory positions.
descriptions of audio settings
The Listen to: function allows you to determine how your TV will
receive an audio signal and play back the sound that you hear. You
can set this function to "Stereo," "S.A.P." or "Mono."
• For almost all situations, you should choose SLereo. With this
setting, the TV will play stereo broadcasts in stereo and mono
broadcasts in mono. If a channel is broadcasting in stereo, the
word "Stereo" will display when you tune to that channel.
• Some TV stations will broadcast second audio program, or
S.A.P. signal. This signal is an additional soundtrack that you
can't hear during normal TV viewing. An S,A.P. signal might
be related to the program you are watching, such as a
soundtrack in a foreign language, or it might be unrelated; for
example, a weather report. If a channel is brcadcasting an .
S.A.P. signal, the letters "SAP" will appear on-screen when_you
tune to that channel. Choose "Listen to: SAP" to hear the S.A.P.
signal.
• Use the Mono setting if you are receiving a weak audio signal.
This setting will reduce background noise. However the TV will
only play in mono, even if the program you are watching is in
stereo.
The Bass setting enhances or reduces low frequency sound.
The Treble setting enhances or reduces high frequency sound.
The Balance setting adjusts the level of sound between the left
and right speakers. Adjust the scale until the sound seems to come
equally from both speakers.
Chapter 3: Operating Your TV
"19-