Filter
Top Products
3131
SW MODE
→
Selecting the Subwoofer mode
Unit
Remote controller
Before operating the
remote controller
Press MODE AUDIO.
The remote controller
remains in the AUDIO mode,
until another MODE button is
pressed.
Press SUBWOOFER MODE on the
unit or SW MODE on the remote
controller.
With the first press of the button, you can
check the present setting. Then each
press of the button changes the subwoofer
mode as follows (a tip on how to select the
right subwoofer mode is in parentheses):
SW Mode 1
(When small–with limited bass signal
handling–front speakers are
connected)
↓
SW Mode 2
(When large–wideband–front speakers
are connected)
↓
SW Mode 3
(When large–wideband speakers are
connected to all channel)
↓
SW Off
(When no subwoofer is connected)
The initial setting varies depending on the
area which it was purchased.
North American and South American
model: SW Mode 1
Other models: SW Mode 2
The normal display resumes in three
seconds.
SUBWOOFER MODE
SW indicator lights up when SW Mode 1, SW
Mode 2 or SW Mode 3 is selected.