Filter
Top Products
38
1
2
1
2
Listening to the Radio
3
There are two ways to select radio stations:
• Manual tuning
• Presetting radio stations then selecting the preset
channels
Presetting Radio Stations
You can preset up to 30 stations.
Unit
4
Tuning in a weak frequency (only for FM stations)
When you tune in a stereo FM station, the FM ST indicator lights up
if the signal is sufficiently strong.
If the signal is weak, you may not be able to tune to the station.
In this case, press FM MODE. The FM ST indicator and AUTO goes
off. Then select the station to which you want to listen.
(At this time, the station will be in mono and interstation noise will be
heard.)
3
Press INPUT 5/∞ repeatedly to
select the band (FM or AM).
e.g. When FM is selected.
Note
You can also select the band with the remote
controller. See next page.
Press and hold TUNING/PRESET
4/¢ for about 0.5 seconds.
• When the band is FM
Auto tuning starts. The frequency
changes in 50 kHz steps.
When a broadcast is received, scanning
stops and the frequency flashes in the
display.
• When the band is AM
The frequency changes as follows:
– (North American and South American
models)
In 10 kHz steps
– (Other models)
In 9 kHz steps
When you release the button, the frequency
stops changing and flashes in the display.
While the frequency is flashing (for
about 5 seconds), press TUNING/
PRESET 4/¢ to change the
frequency.
• The frequency changes each time you
press TUNING/PRESET 4/¢.
• You can change the frequency as long
as the frequency in the display is
flashing. Each press of either button
causes the frequency to flash for about
5 seconds.
Tuning Manually
Tune in the radio station you wish
to preset (see steps in the left
column of this page).
Press PRESET MEMORY.
The MEMORY indicator lights and the
preset number starts flashing in the
display.
While the MEMORY indicator is lit
(for about 8 seconds), press
TUNING/PRESET 4/¢ to select
the preset number.
Press PRESET MEMORY.
The radio station is registered to the
preset channel.
To register another preset station, repeat
steps 1 to 4.
Unit only
Unit Only
Unit only
Appears when a broadcast is received.
PRESET MEMORY
FM MODE
INPUT 5/∞
TUNING/PRESET 4/¢