Filter
Top Products
40
Playing the Connected Source
This section shows you how to play the
sources connected to the DVD Receiver.
You may need to see “Connecting to a TV”
on pages 16, 17 and “Connecting to Audio/
Video Equipment” on pages 21 and 22 while
following the steps in this section.
About digital sound
If the equipment is digitally connected to the DVD Receiver,
the sound from the digital input will automatically be selected
and reproduced instead of the analog sound as explained
below.
• When the VIDEO 1 source is selected, the digital sound
from the DIGITAL INPUT VIDEO 1 COAX jack is
reproduced.
• When the VIDEO 2 source is selected, the digital sound
from the DIGITAL INPUT VIDEO 2 OPT jack is reproduced.
When the digital sound is reproduced, the DIGITAL indicator
lights up in the display. According to the received sound
system, the ŸDIGITAL or DTS indicator lights up.
Note
The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and
PCM sound formats from connected equipment.
Enjoying the picture with the sound of
another source
Play the VIDEO 2 source and select TV/LINE, TAPE/MD/HD,
FM or AM. Then you can enjoy the VIDEO 2 picture and the
sound from the selected input source at the same time.
Various Functions While Playing the
Connected Source
To use the following functions, see page 42.
• Turning on/off the SPEAKERS A/SPEAKERS B Systems
(North American and South American models only)
• Adjusting the Volume
• Muting the Sound
• Listening Through Headphones
• Controlling the Brightness of the display on the DVD Receiver
• Using the Sleep Timer
Enjoying the Sound Effects While
Playing the Connected Source
See page 44.
Press INPUT SELECTOR 2/3 on
the remote controller or INPUT 5/∞
on the unit to select one of the
following input sources:
• VIDEO 1
• VIDEO 2/CDR/PC
• TV/LINE
• TAPE/MD/HD
The selected input source appears in the
multipurpose display. Also the input
source indicator is lit in the display until
the DVD Receiver is switched to another
input source.
e.g. When VIDEO 1 is selected.
Start playing the selected source.
1
2
Remote
controller
Unit
ŸDIGITAL DTS DIGITAL
INPUT SELECTOR 2/3
INPUT 5/∞