42
→
Various Functions Common to all the Sources
Adjusting the Volume
The volume of the front left and right, center, surround left
and right, and subwoofer speakers will be adjusted at the
same time.
When headphones are connected (see next page), you can
adjust the volume of the sound through the headphones.
Operating with the remote controller
Press VOL 5/∞.
Operating with the unit
Turn MASTER VOLUME clockwise
to increase the volume, or
counterclockwise (anticlockwise)
to decrease the volume.
Muting the Sound
Press MUTING.
“Muting” appears in the multipurpose display
for about three seconds. Also the MUTING
indicator flashes in the display during the
muting mode.
To restore the sound, press MUTING again.
Tip
If you turn off the unit during muting, and turn it on again, the sound
will be restored.
Turning on/off the SPEAKERS A/
SPEAKERS B Systems (North
American and South American models
only)
You can turn on or off the speaker systems connected to the
FRONT SPEAKERS A and B connectors individually.
Note
When you select “SPEAKER A+B”, the SPEAKER A system
reproduces stereo sound automatically. (The listening mode is set to
“Stereo.”)
When you select “SPEAKER A”, the listening mode returns to the
previous mode.
Operating with the unit
Press SPEAKER A/B repeatedly.
Each press of the button changes the On/Off
mode as follows:
Only the SPEAKERS A system turns on.
↓
Only the SPEAKERS B system turns on.
↓
Both the SPEAKERS A and B systems
turn on.
Remote
controller only
SPEAKER
A / B