Filter
Top Products
59
After you have made a program, it is then possible to confirm,
add, or clear the contents of the program.
■ To confirm the contents of a program
On a CD or Video CD track program, press PROGRAM to
confirm.
The program screen displays the current program.
On a DVD, select the program type (title or chapter) with the
cursor buttons (2/3).
The current DVD title or chapter program can then be confirmed on
the appropriate program screen.
■ To add to a program
1 Press PROGRAM.
2 Use a number button to add a new title, chapter, or track at
the end of the program.
3 Press PROGRAM to exit the program screen.
■ To add a title/chapter/track to a program
during playback
Press and hold PROGRAM for about 2 seconds.
The current title/chapter/track number appears on-screen together
with the program step number. If there isn’t already a program then a
new one will be created.
Number
buttons
2/3/5/∞
ENTER
CLEARPROGRAM
Before operating the
remote controller
Press MODE DVD.
Additional programming options
DVD
VCD
CD
MP3
■ To delete a number
1 Press PROGRAM.
2 Use the cursor buttons (5/∞/2/3) to highlight the incorrect
number and then press CLEAR.
The number is deleted. If the number was before another number,
the later numbers are reordered automatically.
3 Press PROGRAM to exit the program screen.
Notes
• The complete program will be deleted even if the disc tray is open
or power off (standby).
• Pressing CLEAR when the disc is stopped will clear all programs.
■ To insert a number
1 Press PROGRAM.
2 Use the cursor buttons (5/∞/2/3) to highlight the number
to be placed after the new number and then press the
number button(s) of the number to be inserted.
The new number is inserted before the previously selected
number.
3 Press PROGRAM to exit the program screen.
e.g. DVD
Chapter 07 3 Program 03