Filter
Top Products
46
Choosing Theater-Dimensional Mode
Theater-Dimensional mode is the technology which controls the characteristics of the sounds reaching the listener’s left and right
ears, therefore, there is a sweet spot where you can best experience the Theater-Dimensional effects. You need to adjust the
location of the sweet spot and these other factors for the best possible Theater-Dimensional effect.
The longer the distance
between the two speakers is,
the wider the angle is.
Dialog mode
(“Dialog Mode” appears in the
display.)
Listening angle
(“Lisng. Angle” appears in the
display.)
The dialog in the film may sound less clear because of the music or other sounds depending on
the movie or scene.
In such a case, set “Normal” to “Enhance.” (The factory setting is “Normal” which is the normal
mode.)
Notes
• This function emphasizes the dialog in the center channel since the dialog sound, in most films, is
allocated to the center channel. Therefore, if the dialog is not in the center channel, the sound will not be
enhanced.
• Depending on the type of source, this mode is not very effective.
Left speaker
Enjoying the Sound Effects
The listening angle is the angle at the listening position where the two lines from the left and
right speakers meet.
You need to adjust the listening angle in the following cases:
• If you set “Speaker 2ch” or “Speaker 3ch” in “Speaker Setup” on pages 29 and 30.
Consider the listening angle as being formed from the left and right
front speakers since the
virtual surround signals are output from the front speakers.
• If you cannot place the surround speakers in the correct position.
– Place each surround speaker on top of or on the outer side of each front speaker of the
same side.
– Consider the listening angle as being formed from the left and right
surround speakers since
the virtual surround signals are output from the surround speakers.
Set “Lisng. Angle” to one of the following settings, which you feel is most effective (the
listening angles in parentheses are the ideal degrees):
• Normal (30°)
• Wide (40°)
• Narrow (20°)
Right speaker
40°
20°
L
R
L
R
Listening
angle
Virtual Surround Level
(“V. Surr Level” appears in the
display.)
This parameter adjusts the virtual surround level.
Set “V. Surr Level” to one of the following 7 values, which you feel is most effective:
–3, –2, –1, 0, 1, 2, and, 3