Filter
Top Products
22
Connecting the DVD receiver—Continued
The following matrix shows how the video outputs work in relation to the various video settings.
✓: Output
*1 No picture will be output from other than HDMI when you connect the TV that the native resolution is “720p” or “1080i”.
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
*3 If your TV doesn’t support the “HD Resolution” settings of “720p” and “1080i”, you’ll get no picture.
*4 With the “SCART Output Setting”, you can choose “RGB” or composite video for the SCART output. However, when HDMI is
on, you cannot select “RGB”. Also, when “RGB” is selected, nothing will be output by the component video output (see page 62).
Video input signals flow through the DVD receiver as shown.
HDMI input pass through HDMI output signals as it is.
Video Output/Video Setting Matrix
Setting
Video output
HDMI Output Setting (page 29, 30)
On (default) Off
HD Resolution (page 30) Progressive Setting (page 30)
Auto
480p / 576p
(default)
720p, 1080i Progressive Interlace
HDMI
✓✓✓
*3
No output No output
Component
✓
*1
✓
*2
No output ✓
*2
✓
Composite ✓
*1
✓ No output ✓✓
SCART
*4
(European
model only)
✓
*1
✓ No output ✓✓
Video Signal Flow Chart
VIDEO 1 VIDEO 2/DOCK
HDMI IN V IN V IN
AV CONNECTORVIDEO OUT COMPONENT OUTHDMI OUT
DVD
Composite
HDMI ComponentComposite SCART
TV, projector, etc.
Set top box, VCR, DVD recorder, etc.
Composite
HDMI