Filter
Top Products
55
Configuring the DVD receiver
Here you can configure the DVD receiver in this menu on display.
The configurations are common for the all input settings excluding “AVSync”, “Video1 Input”, “Video2 Input”, and
“AMFreq”.
For detailed information, refer to the pages in brackets.
Setup Menu
1
Remote controller
HOLD
Press and hold the [SETUP] but-
ton for 3 seconds.
When selecting the input other than
DVD, just press the [SETUP] button.
“Balance” appears on the display.
2
Use the Up and Down [ ]/[ ]
buttons to select the menus and
use the Left and Right [ ]/[ ]
buttons to select settings.
3
When you’ve finished, press the
[SETUP] button again.
The setup menu closes.
Press the [RETURN] button to return
previous display.
Balance: 0
SW Level: 0
AVSync: 0ms
Angle:Middle
Dimmer : 1
L Night:Off
Advanced
Lock Setup
Xover :100Hz
AMFreq: 9kHz
Video1 Input
Input :OPT
Video2 Input
Format :Auto
Subwfr: Yes
Front :Small
Operations
*1 Only when the T-D listening
mode is selected, this setting
is available.
*2 Not European models
Subwoofer Level [32]
Speakers Output Balance [56]
Correcting Sound
and Picture Sync [56]
T-D Listening Angle
*1
[43]
Late Night Function [56]
Display Brightness [56]
Lock Setup [56] Front Speakers Size [56]
Enabling/Disabling
the Subwoofer [56]
AM Frequency Step Setup
*2
[57]
Crossover Frequency [57]
Audio Input Setup [57]
Digital Input Signal
Formats [57]