Filter
Top Products
54
Controlling Other Components—Continued
When operating an Apple iPod in RI Dock with an
connection, you can control it by DVD receiver’s remote
controller.
When Using an RI Dock:
• Connect the RI Dock to the VIDEO 2/DOCK INPUT
jacks (see page 26).
• Set the RI Dock’s RI MODE switch to HDD or HDD/
DOCK.
• See to the RI Dock’s instruction manual for more
information.
Press the INPUT [ ]/[ ]buttons to select
“VIDEO 2/DOCK”.
STANDBY/ON button
Sets the iPod to Standby or On.
PLAYLIST [ ]/[ ] buttons*
Used to select the previous or next playlist on the
iPod.
ALBUM [ ]/[ ] button*
Selects the next or previous album.
TOP MENU button*
Used to access menus.
Arrow [ ]/[ ] and ENTER buttons*
Used to navigate menus and select items.
Pause [ ] button
Pauses playback. (With 3rd generation iPods, it
works as a Play/Pause button.)
Rewind [ ] button
Press and hold to rewind.
Fast Forward [ ] button
Press and hold to fast forward.
RANDOM button*
Used with the shuffle function.
(1 REPEAT button*
Used with the repeat function.
(2 MENU button
Works as a Mode button when used with a DS-A2/
A2X RI Dock.
(3 PLAY [ ] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPods, this
button works as a Play/Pause button.)
(4 Stop [ ] button
Stops playback and displays a menu.
(5 Next [ ] button
Selects the next song.
(6 Previous [ ] button
Restarts the current song. Press it twice to select the
previous song.
(7 MODE button*
Turns on the backlight for 30 seconds.
* Buttons marked with an asterisk ( ) are not supported
by 3rd generation iPods.
Notes:
• Auto Power On Function
If you start iPod playback while the DVD receiver is
on Standby, the DVD receiver will automatically turn
on and select VIDEO2/DOCK input. Then, your iPod
will start playback.
• Direct Change Function
If you start iPod playback while listening to another
input source, the DVD receiver will automatically
select VIDEO2/DOCK input.
• When you don’t listen to the iPod, stop playback. The
direct change function activates at the change of tracks
to automatically change the input to VIDEO2/DOCK.
Controlling an Apple iPod in RI Dock
connected to the DVD receiver
(1
(5
(7
(6
(2
(4
(3
*