Filter
Top Products
19
Connecting the DV-CP802—Continued
This section shows how to connect the DV-CP802 to an
AV receiver for Dolby Digital, DTS, DVD-Audio, and
SACD playback.
Digital Audio Connection (Dolby Digital & DTS)
To fully enjoy the Dolby Digital and DTS soundtracks
available on most DVD-Video discs, you need to connect
one of the DV-CP802’s digital audio outputs (OPTICAL
or COAXIAL) to a digital audio input on a Dolby Digi-
tal/DTS-compatible AV receiver. You can also enjoy
Dolby Surround material, if your AV receiver supports
Dolby Pro Logic.
Use an optical (or coaxial) digital audio cable to connect
the DV-CP802’s OPTICAL (or COAXIAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) digital audio
input on your AV receiver, as shown.
Notes:
• Make sure that the Dolby Digital Out setting is set to
“Dolby Digital,” and that the DTS Out setting is set to
DTS (see page 50). Otherwise you won’t get surround
sound.
• The output formats for the OPTICAL and COAXIAL
digital audio outputs can be set independently (see
page 50).
• When playing a Dolby Digital or DTS soundtrack, be
sure to select Dolby Digital or DTS decoding, respec-
tively, on your AV receiver. On some receivers, the
appropriate listening mode is selected automatically.
Refer to your AV receiver’s manual.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
• In addition to a digital connection, it’s recommended
that you also connect the FRONT/D.MIX 1 AUDIO
OUTPUT to a spare analog audio input on your AV
receiver. This will allow you to record audio to a cas-
sette recorder or CD recorder. If your AV receiver sup-
ports Zone 2, you must make an analog audio
connection in order to select the DV-CP802 as the
input source for Zone 2.
Analog Audio Connection
(Dolby Digital, DTS, DVD-Audio & SACD)
To fully enjoy the multichannel audio of DVD-Audio
and SACD, you need to connect the DV-CP802’s 5.1-
channel analog audio output to a multichannel analog
audio input on an AV receiver. Dolby Digital and DTS
soundtracks can also be fully enjoyed with this type of
connection.
Use a multichannel analog audio cable (RCA) to connect
the DV-CP802’s FRONT/D.MIX 2, SURR 1, CENTER,
and SUBWOOFER AUDIO OUTPUTs to a 5.1-channel
analog audio input on your AV receiver. (You can use
several separate RCA audio cables instead of a multi-
channel cable.) Set the SURR MODE (AUDIO OUT)
switch to 1.
If your AV receiver supports 7.1-channels and you’re
using back surround speakers, connect the DV-CP802’s
SURR 2 AUDIO OUTPUTs to the AV receiver’s sur-
round back left and right inputs as well, and set the
SURR MODE (AUDIO OUT) switch to 1+2.
Notes:
• Refer to the hookup information supplied with your
AV receiver.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
• DVD-Video discs may contain Dolby Digital and DTS
soundtracks. The Dolby Digital soundtrack will be
selected by default. To play the DTS soundtrack, use
the movie’s main menu and look under Language or
Audio Setup. Alternatively, use the remote controller’s
[AUDIO] button (see page 41).
• See “Analog Audio Out” on page 52 for information
on how the FRONT/D.MIX 1 and 2 sockets work.
Connecting an AV Receiver
Signal flow
AV component with
Dolby Digital/DTS
decoders
L
R
OPTICAL
COAXIAL
OPTICAL
COAXIAL
L
R
R
L
FRONT
SUB
SURR
CENTER
2 SURR
1
CENTER SURR
2
L
R
SUB
WOOFER
AUDIO OUT
Signal flow
AV receiver