Filter
Top Products
51
Configuring the DV-CP802—Continued
■ Digital Out
With this setting you can turn the OPTICAL DIGITAL
AUDIO OUTPUT on or off. Depending on how you con-
nect the DV-CP802 to your other components, this can
be useful in certain situations.
On (default)
OPTICAL DIGITAL AUDIO OUTPUT is on.
Off
OPTICAL DIGITAL AUDIO OUTPUT is off.
Notes:
• This setting has no effect on the analog audio outputs.
Digital Out/Digital2 (coaxial output)
With these settings you can determine how the
DV-CP802 outputs digital audio from its COAXIAL
DIGITAL AUDIO OUTPUT. The options you choose
will depend on the type of component that you connect.
■ Dolby Digital Out
With this setting you can configure the COAXIAL DIG-
ITAL AUDIO OUTPUT to output Dolby Digital audio
as it is or to downmix it into 2-channel PCM.
Dolby Digital (default)
Choose this option if you’re connecting a component
with a built-in Dolby Digital decoder.
Dolby Digital > PCM
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input, an AV receiver with a built-
in Dolby Pro Logic decoder, or an external D/A con-
verter.
■ DTS Out
With this setting you can configure the COAXIAL DIG-
ITAL AUDIO OUTPUT to output DTS audio as it is or
to downmix it into 2-channel PCM.
DTS (default)
Choose this option if you’re connecting a component
with a built-in DTS decoder.
DTS > PCM
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input or an external D/A con-
verter.
Notes:
• When playing the DTS audio of a DTS CD, set the CD
Audio Setup setting to DTS (see page 55).
■ MPEG Out
With this setting you can configure the COAXIAL DIG-
ITAL AUDIO OUTPUT to output MPEG audio as it is
or to downmix it into 2-channel PCM.
MPEG
Choose this option if you’re connecting a component
with a built-in MPEG decoder.
MPEG > PCM (default)
Choose this option if you’re connecting a stereo hi-fi
amp with a digital input or an external D/A con-
verter.
■ Digital Out
With this setting you can turn the COAXIAL DIGITAL
AUDIO OUTPUT on or off. Depending on how you con-
nect the DV-CP802 to your other components, this can
be useful in certain situations.
On (default)
COAXIAL DIGITAL AUDIO OUTPUT is on.
Off
COAXIAL DIGITAL AUDIO OUTPUT is off.
Notes:
• This setting has no effect on the analog audio outputs.
Linear PCM Out
With this setting you can configure the DV-CP802 to
output digital audio with a high sampling rate (e.g.,
96 kHz) as it is or to downsample it to 48 kHz. This set-
ting applies to the OPTICAL and COAXIAL DIGITAL
AUDIO OUTPUT.
Down Sample On
Choose this option if the component connected to a
DIGITAL AUDIO OUTPUT doesn’t support high
sampling rates.
Down Sample Off (default)
Choose this option if the connected component does
support high sampling rates.
Notes:
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for A/D conversion to the
analog audio outputs.
• With some discs, even if you select Down Sample Off,
digital audio will be downsampled to 48 kHz regard-
less, and in some cases, digital audio may not be out-
put by the DV-CP802’s digital audio outputs.
VCD
CD
MP3
DVD-V
DVD-A