Panasonic AG-VP300P VCR User Manual


 
19
VCR
VCR Playback (continued)
To Playback in the Desired Picture
Quality
(Picture Mode)
This function reproduces optimum playback picture from various
kind of recorded tapes and contents.
Press [PICTURE] and select the corresponding Picture Mode as
follows.
Pressing [PICTURE] once makes
the On Screen Display appear; after
that, pressing it repeatedly changes
the indication in the following order:
STANDARD (Initial Setting)>DYNAMIC>
SOFT>STANDARD (Initial Setting)
Tracking Adjustment and
Vertical Locking Adjustment
Preparations
Switch [VCR/TV/DVD] to “VCR”.
ªFor manual tracking adjustment
The unit usually makes tracking adjustments for you, but you may
need to do it manually, if noise appears on a tape recorded on
other equipment.
During play
Press
[TRACKING/V-LOCK] I or J
.
Repeat until the noise disappears.
To return tracking control to the unit
Press both [TRACKING/V-LOCK] I and J at the same time.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note:
This may not be effective on some tapes.
You can also adjust the tracking with [CH]IJ on the unit
.
ªFor vertical locking adjustment
Adjust the vertical to stop the picture jiggling while paused.
While paused
Press
[TRACKING/V-LOCK] I or J
.
Repeat until the jiggling stops.
To return to the previous condition
Press both [TRACKING/V-LOCK] I and J at the same time.
Note:
This may not work with some televisions. Try adjusting the
vertical on the television itself.
You can also adjust the vertical with [CH]IJ on the unit
.
Mode Characteristic
Example for
Purpose
STANDARD Normal
Recorded
TV programs
DYNAMIC Clear & Vivid Scenery, Sports
SOFT Mild Rental soft tapes
CH 1
STEREO
L R
STANDARD