Filter
Top Products
30
Settings Using the On Screen Display (continued)
Option
Operations
While the VCR MENU is displayed
(Common procedure lpage 28)
1
Select “OPTION” by pressing [Cursor]34 and then
press [ENTER].
2
Press [Cursor]34 to
select the item and press
[Cursor]21 to change
the setting.
To exit the settings screen
Press [MENU] twice.
VCR/DVD/TV
VCR/DVD
REC CHECK
REC
CH
VOLUME
TV
TV
VCR DVD
123
789
0
100
4
5
6
SLOW/SEARCH
NAVI
TOP MENU
MENU
RETURN
PROG/CHECK
QUICK REPLAY
DISPLAY
JET REW
TIMER
ENTER
PLAY
LIST
INDEX/SKIP
OUTPUT
TRACKING/V-LOCK
AV
DIRECT
NAVIGATOR
CANCEL/RESET
MUSIC w/ PICTURE
SEARCH PICTURE SPEED
AUDIO
POSITION MEMORY
VCR/TV
SET UPA-B REPEATREPEAT
PLAY MODE
A.SRD CINEMA
SUBTITLE
ANGLE
VCR/TV/DVD
MENU
AUDIOCANCEL/RESET
DISPLAY
VCR/
DVD
3, 4, 2, 1
ENTER
END :MENU
SELECT : s/r:
OPTION 1/2
OSD ≥ON OFF
TAPE SELECT
≥T120 ≥T160 T180
BLUE BACK ≥ON OFF
JET NAVIGATOR ≥ON ≥OFF
DELETE NAVIDATA ≥NO YES
JET SEARCH x27 ≥x35
MTS ≥MAIN SAP MONO
OUT1[VCR/DVD]
VCR MANUAL ≥AUTO
END :MENU
SELECT : s/r:
OPTION 2/2
On Screen Display
Items Settings (Underlined items are the initial setting.)
OSD (Onscreen display lpage 31) ON
: Messages appear on the television for about 5
seconds after you perform operations.
≥The on screen display will always appear on the TV
screen during rewind, Jet Rewind and fast forward.
OFF: Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
T120
: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
BLUE BACK ON
: The screen shows a blue background when you play
unrecorded portions.
OFF: The blue background function is deactivated.
JET NAVIGATOR (lpage 24) ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 24 to delete data on a single tape.
NO
YES: Then press [ENTER] when you want to delete all the
Jet navigator data.
JET SEARCH (lpage 18)
Set the speed for JET SEARCH when playing EP and VP tapes.
≥It is possible to view the picture recorded in the EP and VP mode
at approx. 27 or 35 times speed.
a27:
a
35:
Select a27 if the picture is poor at a35.
MTS (Changing audio lpage 31)
Set the MTS (Multi-channel Television Sound Stereo) reception
type.
MAIN
: To receive stereo broadcasts.
SAP: To receive SAP when being broadcast.
MONO: To receive monaural broadcasts
(e.g., when reception is poor).
OUT1 [VCR/DVD] (lpage 17)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VCR: Only VCR outputs.
MANUAL: When the VCR output and DVD output are manually
switched
AUTO
: VCR and DVD are automatically switched depending
on the manipulation or the unit operation.