Filter
Top Products
27
VCR
Search Functions (continued)
Searching while checking the
video cassette contents
(Intro-Jet Scan)
The approximate beginnings of each recorded program are played
in succession at high speed so that the program to be viewed can
be located easily.
Preparations
≥Confirm that the TV is on and the unit viewing channel is
selected.
≥Switch [VCR/TV/DVD] to “VCR”.
≥Press [VCR/TV] to select the VCR mode.
≥Load the pre-recorded video cassette.
Operations
1
Press [SEARCH].
(This operation is performed
while this unit is in the stop
mode or normal playback
mode with this unit on.)
≥The tape is rewound to the
beginning, and played for
about 10 seconds at high
speed. It is then fast
forwarded, the VISS (VHS
Index Search System) signals
are searched in succession,
and each time the signals are
found, the tape is played for
about 10 seconds at high
speed.
2
When the program to be
viewed is reached, press
[ 1](PLAY).
≥Normal playback now
commences.
To stop the operation at any time
Press [
∫].
Note:
≥This function may not work properly when recorded programs run
for 15 minutes (25 minutes in VP mode) or less.
55
INTRO-JET SCAN
55
INTRO-JET SCAN
5
INTRO-JET SCAN
On Screen Display
Other Functions
To Delete all of a Cassette’s
Contents
(Tape Refresh Function)
You can delete all of a cassette’s contents (the picture, the sound
and the Jet Navigator data) all at once.
Operations
1
∫
When you want to delete all contents of a cassette
that is recorded while setting “JET NAVIGATOR” in the
VCR MENU “OPTION” to “ON”
Be sure to set “JET NAVIGATOR” to “ON” .
(lpage 30)
∫
When you want to delete all contents of a cassette
that is recorded while setting “JET NAVIGATOR” in the
VCR MENU “OPTION” to “OFF” or is recorded on
another VCR
Be sure to set “JET NAVIGATOR” to “OFF”.
(lpage 30)
2
Insert a cassette that you want to delete the
cassette’s contents.
3
Press [TAPE REFRESH] for 5 seconds or more to
put this unit in tape refresh standby mode.
4
Press [TAPE REFRESH] for 2
seconds or more to start the
tape refresh function.
The tape is rewound to the
beginning, and it is fast-forwarded
with the tape refresh function.
“TAPE REF” and the remaining
tape time are displayed alternately
in the unit’s display.
When the tape reaches the end,
this unit automatically rewinds it to
the beginning.
Note:
≥When a video cassette with a broken off erasure prevention tab is
inserted, this function is not activated.
TIMER REC
TA PE
REFRESH
AV2 IN
REC/OTR
CH
TIMER
CHECK
PICTURE
MODE
EJECT
VCR
STOP PLAY
JET REW
VIDEO
AUDIO
L
R
TAPE REFRESH
TAPE REFRESH
START:TAPE REFRESH
END:STOP
Display Symbol On Screen Display
REMAIN
SP