Filter
Top Products
44
RQT9058
[SD] [USB] [RAM]
This unit saves information about imported still pictures.
Therefore, if still pictures are imported from the same SD card
or USB memory, then only new still pictures will be imported.
Importing Still Pictures from an SD card
or USB memory
[SD] [USB]
[RAM]
Copying Still Pictures via the Album View
Screen
Tips
You can also operate with the following steps
1. Press [DRIVE SELECT] to select the SD or USB drive.
2. While stopped
Press [FUNCTIONS].
3. Press [, ] to select “Other Functions”, then press [OK].
4. Press [, ] to select “Copy New Pictures”, then press
[OK].
Notes
Still pictures already imported cannot be re-imported to
the same DVD-RAM.
This unit saves the information on up to 4,000 still
pictures. If additional still pictures are imported, then the
older information will be deleted.
With the unit stopped
Insert an SD Card or USB
memory.
The menu is automatically displayed.
e.g., [SD]
OK
SD Card inserted.
Select an action or press RETURN.
SD Card Operations
Go to Album View
Copy pictures
When you insert an SD card or USB memory, the menu
may be displayed .
Press [RETURN] to exit the screen.
e.g., [SD]
OK
SD Card inserted.
Select an action or press RETURN.
SD Card Operations
Go to Album View
Copy pictures
, to select “Copy pictures”,
then
OK
Copy New Pictures
Copy from
SD card
Copy to
DVD
Copy New Pictures
Copy from
SD card
Copy to
DVD
, to select “Copy”, then
OK
– Copying starts.
DRIVE
SELECT
to select the copy source
drive (DVD, SD or USB) .
, , , to select an album,
then
SUB MENU
Slideshow
Previous
02/02
Next
3/10/05 Total8
007 008
4/10/05 Total6
DIRECT NAVIGATOR Album View
OK
S
Picture
Video
Page
B
A
Press OK to go to
Picture View
Photo: 3/10/2005 My Album2
SUB MENU
DVD-RAM
- - -- - -- - -
- - -
– [RAM] When the Recordings screen is
displayed, press [B] to switch to the Album
View screen.
– [USB] When the MP3 Menu is displayed,
perform steps 1–4 in “To select fi le type”
on the upper Tips on page 31, selecting
“Pictures” in step 4 to change the playback
mode.
, to select “Copy to SD”,
“Copy to USB” or “Copy to DVD”,
then
OK
, to select “Start copying”,
then
OK
– Copying starts.
Copying Still Pictures