Filter
Top Products
53
RQT9058
,
to select “Off Timer”, then
OK
, to select “2 Hours”, “6
Hours” or “Off”, then
OK
Remote Control
Perform step 1 of “Accessing the Setup Menu” ( 52).
, to select “Setup”, then
,
to select “Remote Control”, then
OK
, to select “Set Code 1”, “Set
Code 2”, or “Set Code 3” then
OK
to set.
While pressing and holding
OK
, press
and hold the numbered button
1
,
2
,
or
3
corresponding to the code set in
step 4 for about 5 seconds to set.
OK
to complete.
Use this function to synchronize the codes for the remote
control and the main unit.
Clock Settings
Perform step 1 of “Accessing the Setup Menu” ( 52).
, to select “Setup”, then
,
to select “Clock Settings”, then
OK
Set Clock Manually
After selecting “Clock Settings” ( above, step 3).
, to select the item you want
to change.
, to change the setting.
– Repeat steps 5–6 to change other items.
OK
to confi rm new date and
time and to initiate the clock.
Set the time change dates for DST
Set the beginning and end dates for DST. ( 12).
Quick Start
One Sec. Quick Start for Recording on DVD-RAM. From the power
off state, recording on DVD-RAM starts about one second after
fi rst pressing the [ DVD/VHS POWER] and then sequentially
pressing [REC] (Quick Start Mode). Power consumption is also
higher when the unit is turned off if this is set to “On”.
Perform step 1 of “Accessing the Setup Menu” ( 52).
, to select “Setup”, then
, to select “Quick Start”, then
OK
, to select “On” or “Off”, then
OK
Restore Default Settings
, to select “Setup”, then
, to select “Restore Default
Settings”, then
OK
This returns Setup menus to default settings, except for the
clock, ratings level, closed caption, and on-screen language.
, to select “Yes” or “No”,
then
OK
, to select “Set Clock
Manually”, then
OK
Off Timer
Select how long the unit remains on when it is not being used.
Perform step 1 of “Accessing the Setup Menu” ( 52).
, to select “Setup”, then
Perform step 1 of “Accessing the Setup Menu” ( 52).
Setting Menus