Filter
Top Products
60
RQT9058
Select Tape Length
Perform step 1 of “Accessing the Setup Menu” ( 52).
Set the length of tape you are using so the unit can show the
correct remaining time.
, to select “VHS”, then
, to select “T120”, “T160” or
“T180”, then
OK
, to select “Select Tape
Length”, then
OK
[T120] T30, T60, T90 and T120 tapes
[T160] T140 and T160 tapes
[T180] T180 tapes
Jet Search
Perform step 1 of “Accessing the Setup Menu” ( 52).
Set the speed for Jet Search ( 34) when playing EP and VP
tapes. It is possible to view the picture recorded in EP or VP
mode at approx. 27 or 35 times speed.
, to select “VHS”, then
, to select “27” or “35”,
then
OK
, to select “Jet Search”, then
OK
[27] Select [27] if the picture is poor at [35].
HDMI RGB Output Range
, to select “HDMI RGB
Output Range”, then
OK
Effective when connected to a device that only supports RGB
output.
After selecting “Functions of HDMI” ( 59, step 3).
, to select “Standard” or
“Enhanced”, then
OK
[Enhanced] When the black and white images are not distinct.
HDMI Audio Output
, to select “HDMI Audio
Output”, then
OK
After selecting “Functions of HDMI” ( 59, step 3).
, to select “On” or “Off”, then
OK
[Off] Audio is output from an amplifi er when using the DIGITAL
AUDIO OUT terminal ( 65).
VIERA Link
, to select “VIERA Link”,
then
OK
After selecting “Functions of HDMI” ( 59, step 3).
, to select “On” or “Off”, then
OK
[On] When “On” is selected, you can operate other “HDAVI
Control” compatible devices using “HDAVI Control”.
Notes
Depending on the equipment to connect, some items may
be shaded in gray on the display and cannot be selected, or
changing settings may be unavailable.
Above items can be set when you set “HDMI Priority” to
“On”.
Setup Menus
Gray Background
Perform step 1 of “Accessing the Setup Menu” ( 52).
Select whether or not the gray background is displayed when a
blank section of a Video tape is played.
, to select “VHS”, then
, to select “On” or “Off”, then
OK
, to select “Gray
Background”, then
OK