Filter
Top Products
RQT8320
13
This unit is not designed to control (turn on or change
channels on) your satellite receiver. However, you can use
VIDEO Plus+ Recording by making the satellite receiver’s
VIDEO Plus+ numbers available for recognition on this unit.
Take the following steps to make all satellite stations
available for recognition on this unit.
Through these steps, you can make timer recording from
satellite stations with VIDEO Plus+ constantly available as
the unit keeps the setting in memory.
Preparation
• Turn on the Satellite receiver(s).
• Select a correct station on the Satellite receiver(s).
1 Press [VIDEO Plus+].
2 Press the numbered buttons to enter
the VIDEO Plus+ number for a satellite
station (e.g. Sky One).
• To correct the number
Press [w] to correct any mistakes.
3 Press [ENTER].
“––––” will appear in the “Name” column.
4 Press [e,r] to select the channel or
AV input that is to be used for
recording from the satellite station.
5 Press [ENTER].
6 Press [e] to select the programme
that you have just set and press [ ] to
delete it from the timer recording list.
It is no longer needed.
Repeat the steps above until you have set dummy timer
recordings for each of the satellite stations that you will
make VIDEO Plus+ recordings from.
To exit the screen
Press [RETURN].
Timer recording from satellite
receiver with VIDEO Plus+
CANCEL
S
SUB MENU
VIDEO Plus+
Record
Remain
7/ 5 SUN
SP
Input PlusCode Number 0-9, and press ENTER.
ENTER
RETURN
8:12:34
1:57
Number
--
0 9
S
SUB MENU
Please select channel.
Name Date Start Stop Mode
Timer
Recording
Remain
7/ 5 SUN
SP
7/ 5 SUN 19:00 20:00 SP
ENTER
RETURN
Programme Name
Number
--
0 9
8:14:56
1:57
CANCEL
Timer
Recording
Remain
8:15:45 7/ 5 SUN
1:57 SP
NameNo. Date
7/ 5 SUN
Start
19:00
New Timer Programme
Stop
20:00
Mode
SP
Drive
space
OK
ENTER
RETURN
AV201
S
SUB MENU
Timer Off
A
CANCEL
TV Tuning (Auto Setup)