Filter
Top Products
RQT8320
8
Connection
• Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 2.
• Choose from one of the connection types A-C that suits your requirement.
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (Ô page 38).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
“AV1 Output” in the Setup menu (
Ô page 40)
Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).
After completing the above connections, proceed to the TV Tuning (Ô page 12).
Use of the supplied RF coaxial leads
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit
to your TV and aerial outlet or aerial lead, as shown in connection types A-C.
• Keep the RF coaxial leads as far away as possible from other leads.
• Do not roll up the RF coaxial leads.
Connecting to a television only
Required setting
VHF/UHF
RF IN
AV IN
3
1
1
2
4
4
Television’s rear panel
This unit’s rear panel
To the aerial
Fully wired 21-pin
Scart lead
(For Q Link functions)
RF coaxial lead
(included, black)
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
RF coaxial lead (included, grey)
To household mains socket
RF coaxial lead (included, black)
or
This unit
Use one of the RF coaxial lead (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial lead.