Filter
Top Products
Pelco Manual C681M-D (2/02) 23
DEFINE GROUP SETTING
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the
SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.
3. Turn the JOG dial to move the cursor to DEFINE GROUP SETTING, and then turn the
SHUTTLE ring to the right. The Define Alarm Group menu appears.
4. Turn the JOG dial to move the cursor into one of the camera fields, and then turn the
SHUTTLE ring to the right. The Priority (PRI) option starts flashing.
NOTE:
If the PRE A-REC field in this menu has been set to SHORT, MEDIUM,
or LONG, the option does not flash because it cannot be changed.
5. Turn the JOG dial to select an option, and then turn the SHUTTLE ring to the right.
The option stops flashing.
Turning the JOG dial switches the priority options as follows:
1, 2, 3, 4, 5, -
The - (hyphen) means that camera channel is turned off; that is, if there is an alarm, it
will not be recorded.
For camera channels with a Priority setting of 1-5, the recording interval set in maxi-
mum recording fields is divided according to the value entered in the Priority setting.
The FILD (FIELDS) setting will vary according to this value.
NOTE:
When the AUDIO RECORDING setting in the Initial Set Up menu is ON,
the only options available are 1 and -.
NOTE:
When the RECORD ALARM setting in this menu is set to SEP, the only
options available are 1 and -. The FILD screen remains blank.
6. Repeat steps 4 and 5 for other cameras. Every camera channel must be assigned a
priority setting; otherwise, you will not be able to exit the menu.
7. Turn the SHUTTLE ring to the left once to return to the A-Rec/M-Det Setting menu or
twice to return to the Menu Setting menu, or press the SET UP button to exit the pro-
gramming mode.