Pelco DX3000 DVR User Manual


 
66 Pelco Manual C681M-D (2/02)
Alarm List Search
The Alarm List search retrieves alarm video at the time an alarm occurred. It does not re-
trieve pre-alarm recording if the pre-alarm recording option was turned on (PRE A-REC
field in the A-Rec/M-Det Setting menu).
Up to 500 alarm times (DX3009 models) or 800 alarm times (DX3016 models) can be stored
in the alarm list. After the 500th time (DX3009 models) or 801st time (DX3016 models), the
first alarm time is erased and the 501st (or 801st) alarm time is added to the list.
1. Press the SEARCH button to display the Search Selection menu.
2. Make sure the cursor is next to SELECTION CAMERA NO., and then turn the
SHUTTLE ring to the right. The option starts flashing.
3. Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right.
The option stops flashing.
Turning the JOG dial switches the options as follows:
DX3009 Models – ALL, 1, 2, 3, 4, 5, 6, 7, 8, 9
DX3016 Models – ALL, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
4. Turn the JOG dial to move the cursor to ALARM LIST SEARCH, and then turn the
SHUTTLE ring to the right to display the Alarm List Search menu.
5. Turn the JOG dial until the cursor is at the desired alarm list number. When the cursor
reaches either the top or the bottom of the list, the Alarm List Search menu scrolls to
the next page. To move through the pages, place the cursor over “No.”, and then turn
the SHUTTLE ring.
6. Turn the SHUTTLE ring to the right. The unit begins the alarm list search and retrieves
the image associated with the selected time.
NOTE:
If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to
SHORT, MEDIUM, or LONG, the search cannot be done.
Images appear in a 9-camera display (DX3009 models) or 16-camera display
(DX3016 models) if ALL was selected or on a single screen if an individual camera
was selected. The PLAY and PAUSE buttons light.
7. Press the SEARCH button to clear the Alarm List from the screen.
8. To change the 9-camera display (DX3009 models) or 16-camera display (DX3016
models) to a single-camera display, press the CAMERA number button on the front of
the recorder. The display for the single camera appears.
9. Press the PLAY or PAUSE button to play back the searched image.
10. Press the STOP button to stop playback and exit the search function.
Jump to Starting Point
Select this option to play back the oldest recorded data.
1. Press the SEARCH button to display the Search Selection menu.
2. Turn the JOG dial to move the cursor to JUMP TO START POINT, and then turn the
SHUTTLE ring to the right. The Jump to Start Point screen appears.
3. Turn the SHUTTLE ring to the right. The recorder displays the oldest recordings on a
9-camera screen (DX3009 models) or 16-camera screen (DX3016 models). The PLAY
and PAUSE buttons light.
4. To change the 9-camera display (DX3009 models) or 16-camera display (DX3016
models) to a single-camera display, press the CAMERA number button on the front of
the recorder. The display for the single camera appears.