Philips 00 TV DVD Combo User Manual


 
English
PRODUCT DESCRIPTION 9
1.3 Smart card reader
Your receiver is fitted with a smart card reader.
The smart card is intended for Pay TV channels or for
future applications.
Inserting your smart card shall be done on the front panel
left side.
Note: the smart card golden or Silver contacts shall be facing
up at card insertion.
2 Preparing, setting and using your Remote
Control
2.1 Installation of batteries
Remove the remote control back cover.
Insert the two batteries (type R06 /AA –1.5 V) supplied.
Position them as shown in the diagram in the battery
compartment.
Replace the cover.
The Philips batteries supplied with your receiver's remote
control do not contain heavy metals such as Mercury or
Nickel Cadmium.
Nevertheless in many countries exhausted batteries may
not be disposed of with your household waste. Please
ensure you dispose of exhausted batteries according to
local regulations.
2.2 Setting of your remote control
2.2.1 Mode setting
Your 5 in 1 Remote control allows the control of most of
your Audio /Video equipment through various modes,
which are: Terrestrial receiver mode so called STB (Set
Top Box), TV, VCR, DVD and Amplifier-Tuner.
Pressing the MODE button once will remind you the
mode you are in through blinking lights: left for STB,
middle for TV, right for VCR, left-middle for DVD and
middle-right for Amplifier-Tuner.
To set a given mode press the MODE button several
times until the desired mode is signalled by the light(s).
The setting sequence is STB TV VCR DVD
Amplifier-Tuner.
6610_A5_GB.qxd 01/09/2004 12:58 Page 9