Filter
Top Products
34
3
Press ACH+ . Select then 'SETUP' with the C or D button.
Use CH- B , ACH+ to select 'Change system settings'.
Confirm with OK .
4
Use CH- B , ACH+ to select 'No, repeat setup process'.
5
Confirm with OK .
Use ACH+ , CH- B to select your country.
6
Confirm with OK .
7
Enter the postal/zip code where the DVD Recorder is being set
up.
Why do I have to enter the postal/zip code?
For the GUIDE Plus+
®
system to operate correctly, it needs to know its
current location and the TV channels available at that location. The DVD
Recorder works this out automatically on the basis of the postal/zip
code and country.
?
8
Confirm with OK .
9
Does your TV have an antenna or a cable connection?
'Cable service''No': Antenna
'Cable service''Yes': Cable connection
Was is the difference between cable and antenna?
The difference is that they have different channel line up's. In the antenna
setting, only channels from 2 to 69 can be entered. In the cable setting,
however, channels 1 to 125 can be entered.
?
10
Confirm with OK .
If you selected 'Cable service''No', there is nothing else you
need to do here. Read on in the section entitled 'Finalize set-up'.
Otherwise, you should continue here.
11
Did you connect an external cable box to your DVD Recorder?
'Yes': External cable box
'No': Connection to a cable network.
12
Confirm with OK .
If you selected 'No', there is nothing else you need to do here.
Read on in the section entitled 'Finalize set-up'.
Otherwise, you should continue here.
13
If you connected the cable box to the DVD Recorder only via
the antenna cable, select the channel number on which the cable
box is transmitting (usually channel 3).
If the cable box is connected via the Video/Audio or S-Video jack,
select the relevant input jack of the DVD Recorder on the
screen.
An incorrect setting here may lead to poor TV reception.
14
Confirm with OK .
The GUIDE Plus+