Filter
Top Products
83
Programming a recording without the
VCR Plus+
®
system
1
Switch on the TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
2
Press TIMER s on the remote control.
The current information will appear on the screen.
aI will see some informations about the GUIDE Plus+
®
system
b The GUIDE Plus+
®
system was not installed yet. Read therefore in
the chapter 'The GUIDE Plus+
®
system' the section 'Set up the
GUIDE Plus+
®
system'.
Problem
3
Select the line with CH- B , ACH+ .
Select the entry field with D or C .
4
Enter information with the number buttons 0..9 .
In the entry field 'Date', you first enter the month and then the
date.
Change 'AM/PM'
Use the blue function button to select 'AM'or'PM' in the last input
fields of 'Start time' and 'End time'.
Tip
5
When all settings are correct, confirm with OK . You can delete
all the entries with the green button.
Setting up repeat recordings
If you have highlighted an entry, you can choose from the following
settings with the green function button:
Frequency : 'Once': once recordings
'Daily': Repeated daily recordings from Monday to
Sunday.
'Regularly': Repeated daily recordings when the show is
available.
'Weekly': Repeated weekly recordings (every week on
the same day).
'Off': this will stop any future occurrences of the program
from being recorded but will keep the show in the list.
Tip
7
An entry with the data will appear in the 'SCHEDULE' menu.
To find out how you change the data, read the section on 'How
to change or delete a programmed recording (TIMER)'.
8
Insert a DVD ready for recording (without write protection).
The disc is checked.
ENGLISH
Programming a recording (TIMER)