Filter
Top Products
Boat Remote User’s Manual
22
Bilge Pump
The Boat Remote will monitor bilge pump activity when the positive
power wire to the bilge pump is connected to the BP1 or BP2 inputs.
This power connection can typically be made at any one of three
locations:
1. At the bilge pump itself, where the positive power wire is con-
nected.
2. At the float switch that controls the bilge pump, using the power
wire that goes to the bilge pump.
3. At the console, where a bilge pump light may be located.
Connect to the wire that goes to the bilge pump.
Fig. 2.5 Connecting the Bilge Pump