Filter
Top Products
Chapter 3: Programming
37
Current Time & Today’s Date
The real-time clock is a necessary element of your Boat Remote.
The alarm recognition time, call delay, and bilge pump cycle rate are
all based on this built-in clock. The clock runs on military time and
the date is month and day only. The default is 0:00 am, 1/1.
To program the time, use the numbers keys to enter the hour. Press
ENTER. Use the number keys to enter the minutes. Press ENTER.
Use the number keys.
Press ENTER.
To program the date, use the number keys to enter the month. Press
ENTER. Use the number keys to enter the day. Press ENTER. Use the
number keys to enter the last two digits of the year. Press ENTER.
Use the number keys.
Press ENTER.
DIAL OUT PHONE NUMBERS
The Boat Remote can store up to eight different phone numbers, 32
digits each, for dial out. Each input can be programmed to selectively
dial any of those 8 phone numbers during an alarm dial out. In the
event of an alarm, the numbers are dialed sequentially, 1-8. Boat