Filter
Top Products
Boat Remote User’s Manual
24
Fig. 2.7 Connection to the Auxiliary Input
Output
The Boat Remote features a switched 12V output signal that can be
used to turn on a siren or strobe light when an alarm occurs. The
power for the output is derived from the boat battery. This allows the
output to function in the event of a power failure. The figure below
shows how a strobe light would be connected to the output terminal.
The negative terminal from the light or siren must connect to the
boat ground (or the negative terminal of the boat battery). The output
can be programmed to trip if any alarm occurs or if the security
alarm only occurs. See Chapter 3 for programming the output.
Fig. 2.8 Connecting a Strobe Light to the Output