Filter
Top Products
Boat Remote User’s Manual
52
the eight numbers that you programmed for dial out, or any combina-
tion of the eight numbers. Remember, regardless of what order you
enter your Input phone selections, the phone numbers will be dialed
in order, according to their sequence number (1-8). The display will
reflect this.
Use the number keys.
Press ENTER.
The display will reflect your selection.
Phone Selection:
1,2,4,6
The last item the unit asks you is if you want to reset the bilge pump
data, accumulated run time and cycle rate. Using the MODE key,
toggle between Y and N, yes and no, for the Reset Bilge Data. If you
wish to clear all accumulated bilge pump data at this time, press
ENTER when the Y for yes is displayed. This feature will reset the
accumulated run time and accumulated cycle rate and will begin to
accumulate the data again, starting now.
Press
MODE.
Press ENTER.