Filter
Top Products
Chapter 3: Programming
45
Use the number keys.
Use the CODE key to insert a decimal point.
Press ENTER.
Using the number keys on the keypad enter the Low Limit. The
default is 11.0V and the range is 0-16 Volts. Use the CODE key to
insert a decimal point.
Use the number keys.
Use the CODE key to insert a decimal point.
Press ENTER.
Using the number keys on the keypad enter the Alarm Recognition
Time in minutes and seconds. The range is from 1 second to 999
minutes 59 seconds. The default is 5.0 minutes. Use the number
keys to enter the minutes and press ENTER. Then, repeat for seconds.