Filter
Top Products
Boat Remote User’s Manual
36
(°F). Toggle between Celsius and Fahrenheit by pressing the MODE
key while in the Set System menu when Temperature is displayed.
Press ENTER once your choice is displayed.
Press
MODE.
Press ENTER.
Output Trigger & Output Mode
The output terminal will provide 12V power to an accessory when
alarms occur. The Output Trigger can be programmed to trigger the
output if any one of the inputs is in alarm or if the security input only
is in alarm. The Output Trigger default is set to trigger for the security
input only. To change the Output Trigger press the MODE key until your
choice is displayed and then press ENTER.
Press
MODE.
Press ENTER.
The Output Mode determines whether the output trips in Away mode
only or in both Away mode and On-Board mode. The default is set
for Away Mode only. To change the Output Mode, press the MODE key,
while in the Set System menu, until your choice is displayed.
Press
MODE.
Press ENTER.