Filter
Top Products
02
18
En
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu according to
the type of cable connected (page 21).
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable, an S-Video cable or a video
cable.
Connecting a TV using a component
video cable and an audio cable
Note
• When connected to the TV using a component video cable, video
signals are not output with a resolution of 1080/24p or 1080/60p.
• Depending on the output video resolution setting, the picture
may not be output (page 25).
Connecting a TV using a video
cable and an audio cable
Caution
• Connect the player’s video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
Note
• Video signals are output with a resolution of 480/60i when
connected using a video cable or an S-Video cable.
R
VIDEO OUT
HDMI OUT
RS-232 C
DIGITAL OUT
LAN(100)
CONTROL
IN
L
R
L
R
L
YPBPR
FRONT
OPTICAL COAXIAL
COMPONENT VIDEO
SURROUNDCENTER
VIDEO
S-VIDEO
MAIN(KURO LINK)
SUB
SUB WOOFER SURROUND
BACK
AUDIO OUT ( 7.1 ch )
VIDEO OUT
RS-232 C
YPBPR
COMPONENT VIDEO
VIDEO
S-VIDEO
R
DIGITAL OUTLAN(100)
L
FRONT
OPTICAL COAXIAL
S
U
TV
Player’s rear panel
To component
video input
terminals
Component cable or
three video cables
(commercially
available)
Direction of
signal flow
To audio input
terminals
Audio cable (included)
Red
White
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
Use the BNC-RCA
adapter (included)
to connect an RCA
pin type cable.
R
VIDEO OUT
HDMI OUT
RS-232 C
DIGITAL OUT
LAN(100)
CONTROL
IN
L
R
L
R
L
YPBPR
FRONT
OPTICAL COAXIAL
COMPONENT VIDEO
SURROUNDCENTER
VIDEO
S-VIDEO
MAIN(KURO LINK)
SUB
SUB WOOFER SURROUND
BACK
AUDIO OUT ( 7.1 ch )
R
DIGITAL OUTLAN(100)
L
FRONT
OPTICAL COAXIAL
S
U
VIDEO OUT
RS-232 C
YPBPR
COMPONENT VIDEO
VIDEO
S-VIDEO
TV
Player’s rear panel
To S-Video
input
terminal
Video cable
(included)
An S-Video cable (commercially
available) can also be used for
connection.
To video
input
terminal
Yellow
Direction of
signal flow
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
Audio cable (included)
Red
White
To audio input
terminal